ipmitool.markdown

@@ -9,13 +9,13 @@ PASSWORD="" # not shown here for security purposes
 
 Get a serial console. This console is only useful during boot time and can access the boot configuration menu and the bios. Also you can see if the PXE boot process works.
 
-```
+```bash
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD sol activate
 ```
 
 You can check a node's power status and change it. Useful if you need to reboot a node if you locked yourself out of ssh with a bad iptables configuration.
 
-```
+```bash
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis power status
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis power off
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis power on
@@ -23,14 +23,14 @@ ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis power on
 
 You can change the boot device if you want to switch from PXE boot to disk and vice versa.
 
-```
+```bash
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis bootdev pxe
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis bootdev disk
 ```
 
 You can list additional IPMI commands and possible parameters if you provide insufficient parameters for the tool.
 
-```
+```bash
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis
 ipmitool -I lanplus -H $IPMI_IP -U ADMIN -P $PASSWORD chassis bootdev